1333.1811.02

Set 2 x R&SRT-ZI10C, R&S ScopeRider (R&SRTH) lab probe, 500 MHz, passive, isolated, 10:1, 10 MOhm, 11 pF, 300 V CAT III, 1.2 m cable, BNC connector, including standard accessories

PN:[RT-ZI10C-2]

Open Market/ 22 Weeks

1317.3420.02

Test fixture set for USB2.0 compliance test with R&SRTO oscilloscopes and R&SRTO-K21 USB2.0 Compliance Test SW; consists of USB2.0 Signal Quality Board, USB2.0 Load Board, cables and adapters (accessory)

PN:[RT-ZF1]

Open Market/ 22 Weeks

1321.1211P04

Package Cable Rider ZPH (2-ports) CH Package (4 GHz) Contains serialized products: R&SCable Rider ZPH 1321.1211K12 consisting of -R&SCable Rider ZPH, 2MHz - 3GHz -R&SZPH-B4 Freq. Upgrade 3 GHz - 4 GHz

PN:[ZPH-P4SA]

Open Market/ 12 Weeks

1332.6455.22

Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B22 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA67-U22]

Open Market/ 22 Weeks

1332.6455.21

Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B21 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option)

PN:[ZNA67-U21]

Open Market/ 22 Weeks

1332.6490.31

Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B31 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option)

PN:[ZNA67-U31]

Open Market/ 22 Weeks

1332.6490.33

Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B33 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option)

PN:[ZNA67-U33]

Open Market/ 22 Weeks

1332.6490.34

Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B34 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option)

PN:[ZNA67-U34]

Open Market/ 22 Weeks

1332.6455.23

Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B23 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA67-U23]

Open Market/ 22 Weeks

1332.6455.24

Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B24 and cable set for installation. Retrofit in Rohde & Schwarz service center (hardware option)

PN:[ZNA67-U24]

Open Market/ 22 Weeks

1332.6490.32

Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps, for R&SZNA67, Upgrade-option, consists of R&SZNA67-B32 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option)

PN:[ZNA67-U32]

Open Market/ 22 Weeks

1332.6449.22

Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B22 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U22]

Open Market/ 22 Weeks

1332.6449.21

Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B21 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U21]

Open Market/ 22 Weeks

1332.6484.31

Receiver step attenuator for port 1, mechanical, 35dB in 5 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B31 and cable set for installation. Retrofit in Rohde & Schwarz service center (hardware option)

PN:[ZNA50-U31]

Open Market/ 22 Weeks

1332.6449.23

Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B23 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U23]

Open Market/ 22 Weeks

1332.6449.24

Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B24 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U24]

Open Market/ 22 Weeks

1332.6484.34

Receiver step attenuator for port 4, mechanical, 35dB in 5 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B34 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U34]

Open Market/ 22 Weeks

1332.6484.32

Receiver step attenuator for port 2, mechanical, 35dB in 5 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B32 and cable set for installation. Retrofit in Rohde & Schwarz service center (hardware option)

PN:[ZNA50-U32]

Open Market/ 22 Weeks

1332.6484.33

Receiver step attenuator for port 3, mechanical, 35dB in 5 dB steps, for R&SZNA50, Upgrade-option, consists of R&SZNA50-B33 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U33]

Open Market/ 22 Weeks

1603.1800.02

LMG-Z-SVT10 - High temperature Extension cable Very well shielded, interference-resistant (DSUB9-F/DSUB9-M) length 10m, Temperature range -40C to 90C. Up 1800 A peak current for all PCTx-Lx current sensors.

PN:[LMG-ZSVT10]

Open Market/ 22 Weeks

1603.1816.02

LMG-Z-SVT15 - High temperature Extension cable Very well shielded, interference-resistant (DSUB9-F/DSUB9-M) length 15m, Temperature range -40C to 90C. Up 1000 A peak current for all PCTx-Lx current sensors.

PN:[LMG-ZSVT15]

Open Market/ 22 Weeks

5610.1713.06

Filter bank with multiple band-reject and a high-pass 3 GHz filters. Covering technologies: WLAN 5 GHz (5.25, 5.78, 5.59 GHz). Including internal high frequency RF switches and cabling set. To be installed inside anechoic chamber.

PN:[FILTERBANK]

Open Market/ 22 Weeks

5610.1713.07

Filter bank with multiple band-reject and a high-pass 3 GHz filters. Covering technologies: WLAN 5 GHz (5.25, 5.78, 5.59 GHz). Including internal high frequency RF switches and cabling set. To be installed inside anechoic chamber.

PN:[FILTERBANK]

Open Market/ 22 Weeks

1537.8206.30

Line distributor 230 V AC; 6L + 6N + 6PE 6x 16 A 50/60 Hz Alternative use with 200 V (Japan): 200 V AC; 6L + 6N + 6PE 6x 20 A connection cable w/o plug

PN:[CS-LDE3-JP]

Open Market/ 22 Weeks

1506.9000.02

Antenna coupler for TS7121: GSM, CDMA2000, WCDMA + Bluetooth, 2 inputs - GSM, etc.: 770-900MHz and 1.7-2.2GHz, - Bluetooth: 2.4 GHz, with RF cable to ext. N-conn. (no.1+4), with absorber for TS7121

PN:[TS-F21AGB]

Open Market/ 22 Weeks

1527.8349.02

ext. RS232 remote control box for TS712xP-AS, provides interface between control computer (RS-232)and 25 pin connector of TS712xP-AS (25 pin cable between control box and TS712xP-AS is included)

PN:[TS-F24RC]

Open Market/ 22 Weeks

1800.4700.02

1,5 GHz modular probe amplifier MultiMode for differential, single- ended, and common mode, 1.2m cable, 400kOhm diff., 200kOhm se., ProbeMeter, micro button requires FW 3.35 or higher (R&SRTO and R&SRTE Oscilloscopes)

PN:[RT-ZM15]

Open Market/ 22 Weeks

1419.3105.02

6 GHz modular probe amplifier, MultiMode for differential, single-ended, and common mode, 1.2m cable, 400kOhm diff., 200kOhm se., ProbeMeter, micro button requires FW 3.35 or higher (R&SRTO and R&SRTE Oscilloscopes)

PN:[RT-ZM60]

Open Market/ 22 Weeks

1419.3911.02

Storage case for up to 6 tip cables of type RT-ZMA10, RT-ZMA11, RT-ZMA12 and RT-ZMA15 (incl spare solder-in resistors for RT-ZMA15 and solder leads for RT-ZMA12 and RT-ZMA15)

PN:[RT-ZMA1]

Open Market/ 22 Weeks

1419.3205.02

9 GHz modular probe amplifier, MultiMode for differential, single-ended, and common mode, 1.2m cable, 400kOhm diff., 200kOhm se., ProbeMeter, micro button requires FW 3.35 or higher (R&SRTO and R&SRTE Oscilloscopes)

PN:[RT-ZM90]

Open Market/ 22 Weeks

1332.4730.50

Cable Set for ZNA-K9: Combines signals from Port 1 and Port 3 to a two-tone signal at Port 1 (for IM and ZNA-K9 embedded LO GD measurements) for ZNA50, 4-port (2.4mm - 2.4mm)

PN:[ZNA50-Z9]

Open Market/ 22 Weeks

1332.4730.67

Cable Set for ZNA-K9: Combines signals from Port 1 and Port 3 to a two-tone signal at Port 1 (for IM and ZNA-K9 embedded LO GD measurements) for ZNA67, 4-port (1.85mm - 1.85mm)

PN:[ZNA67-Z9]

Open Market/ 22 Weeks

1332.4730.26

Cable set for ZNA-K9 for R&SZNA26 (4 ports) with 3.5 mm (m) connectors Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

PN:[ZNA26-Z9]

Open Market/ 22 Weeks

1332.4730.43

Cable set for ZNA-K9 for R&SZNA43 (4 ports) with 2.92 mm (m) connectors Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

PN:[ZNA43-Z9]

Open Market/ 22 Weeks

1332.4730.44

Cable set for ZNA-K9 for R&SZNA43 (4 ports) with 2.4 mm (m) connectors Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

PN:[ZNA43-Z9]

Open Market/ 22 Weeks

5610.1713.05

Filter bank with multiple band-reject and high-pass filters (high-pass 3 and 6 GHz). Covering technologies: WLAN 5 GHz (5.25, 5.78, 5.59 GHz). Including internal high-frequency RF switches and cabling set. To be installed inside anechoic chamber.

PN:[FILTERBANK]

Open Market/ 22 Weeks

1603.2841.02

LMG-Z309I - Safety interconnection cable 3m set, up to 32 A/1000 V 1 set Safety interconnects (violet and gray) l=3m, connector d=4mm, PVC-insulated 2.5 mm stranded wire, 32A/1000V AC+DC, stackable.

PN:[LMG-Z309I]

Open Market/ 22 Weeks

1603.2870.02

LMG-Z310I - Safety interconnection cable, 6m set, up to 32 A/1000 V 1 set Safety interconnects (violet and gray) l=6m, connector d=4mm, PVC-insulated 2.5 mm stranded wire, 32A/1000V AC+DC, stackable.

PN:[LMG-Z310I]

Open Market/ 22 Weeks

1603.2906.02

LMG-Z311I - Safety interconnection cable, 10 m set, up to 32 A/1000 V 1 set Safety interconnects (violet and gray) l=10m, connector d=4mm, PVC-insulated 2.5 mm stranded wire, 32A/1000V AC+DC, stackable.

PN:[LMG-Z311I]

Open Market/ 22 Weeks

1804.5000P13

Package Isolated probing system, 350 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B903 350 MHz option - ZISO-B403 3 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO03]

Open Market/ 12 Weeks

1804.5000P21

Package Isolated probing system, 100 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B901 100 MHz option - ZISO-B410 10 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO01L]

Open Market/ 22 Weeks

1804.5000P22

Package Isolated probing system, 200 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B902 200 MHz option - ZISO-B410 10 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO02L]

Open Market/ 22 Weeks

1804.5000P23

Package Isolated probing system, 350 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B903 350 MHz option - ZISO-B410 10 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO03L]

Open Market/ 22 Weeks

1804.5000P12

Package Isolated probing system, 200 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B902 200 MHz option - ZISO-B403 3 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO02]

Open Market/ 22 Weeks

1804.5000P14

Package Isolated probing system, 500 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02), consisting of: - ZISO-B905 500 MHz option - ZISO-B403 3 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO05]

Open Market/ 22 Weeks

1804.5000P11

Package Isolated probing system, 100 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B901 100 MHz option - ZISO-B403 3 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO01]

Open Market/ 22 Weeks

1804.5000P24

Package Isolated probing system, 500 MHz Contains serialized product + option: R&SZISO Isolated Probe System (1804.5000K02) consisting of: - ZISO-B905 500 MHz option - ZISO-B410 10 meter fiber cable - ZISO-Z301 TIP BROWSER 10X 300V 10MOhms

PN:[RT-ZISO05L]

Open Market/ 22 Weeks

5610.1713.04

Filter bank with multiple band-reject and high-pass filters (high-pass 3 and 6 GHz). Covering technologies: LTE, and WLAN 5 GHz (5.25, 5.78, 5.59 GHz). Including internal high-frequency RF switches and cabling set. To be installed inside anechoic...

PN:[FILTERBANK]

Open Market/ 22 Weeks

9036.7148.02

PR100 Stationary Direction Finder Upgrade Kit consisting of: - Direction Finder FW upgrade for PR100 - Cable set for connecting DDF007 to ADD107 or ADD207 antennas - Hard case Remark: - PR100 must have PR100-GPS option installed - PR100-PS and PR100...

PN:[TS-SDF-UP]

Open Market/ 12 Weeks

1603.2812.02

LMG-Z308I - Safety interconnection cable 1.5 m set, up to 32 A/1000 V 1 set Safety interconnects (violet and gray) l=1.5m, connector d=4mm, PVC-insulated 2.5 mm stranded wire, 32A/1000V AC+DC, stackable.

PN:[LMG-Z308I]

Open Market/ 22 Weeks